RAID 1 vs RAID 10: Performance, Fault Tolerance, and Cost
| Aspect | RAID 1 | RAID 10 |
|---|---|---|
| Performance | Read speed can improve (up to sum of disks), but write speed is about that of a single disk. | Offers faster read and write speeds due to striping and mirroring combined; can achieve up to 4x read speed and 2x write speed gains with 4 disks. |
| Fault Tolerance | Can survive failure of one disk (mirroring). | More fault-tolerant than RAID 1; can survive multiple disk failures as long as no mirrored pair loses all disks. |
| Storage Efficiency | Uses 50% of total disk capacity (mirroring halves usable space). | Also uses 50% of total disk capacity due to mirroring combined with striping. |
| Cost | Requires at least 2 disks; cost is higher per usable GB due to mirroring. | Requires minimum 4 disks; higher cost due to more disks but better performance and fault tolerance. |
| Complexity | Simple to set up and manage. | More complex setup but offers better reliability and performance. |
Details:
-
Performance: RAID 1 improves read speeds because data can be read from either disk, but write speed is limited to a single disk's speed. RAID 10 combines mirroring and striping, providing significantly better read and write speeds, especially with more disks (e.g., 4 disks can yield up to 4x read and 2x write speed improvements).
-
Fault Tolerance: RAID 1 can tolerate the failure of one disk without data loss. RAID 10 offers higher fault tolerance because it can survive multiple disk failures as long as they are not in the same mirrored pair. This makes RAID 10 more reliable for critical data.
-
Cost and Storage: Both RAID 1 and RAID 10 use mirroring, so usable storage is roughly half of the total disk capacity. RAID 10 requires more disks (minimum 4), increasing upfront cost but providing better performance and fault tolerance.
-
Use Cases: RAID 1 is suitable for smaller setups where simplicity and data redundancy are priorities. RAID 10 is preferred for high-performance environments requiring both speed and fault tolerance, such as web servers or databases.
In summary, RAID 10 outperforms RAID 1 in speed and fault tolerance but at a higher cost and complexity, while RAID 1 offers simpler setup and reliable data protection with moderate performance benefits. The choice depends on your specific needs for performance, reliability, and budget.
Ang PH Ranking ay nag-aalok ng pinakamataas na kalidad ng mga serbisyo sa website traffic sa Pilipinas. Nagbibigay kami ng iba’t ibang uri ng serbisyo sa trapiko para sa aming mga kliyente, kabilang ang website traffic, desktop traffic, mobile traffic, Google traffic, search traffic, eCommerce traffic, YouTube traffic, at TikTok traffic. Ang aming website ay may 100% kasiyahan ng customer, kaya maaari kang bumili ng malaking dami ng SEO traffic online nang may kumpiyansa. Sa halagang 720 PHP bawat buwan, maaari mong agad pataasin ang trapiko sa website, pagandahin ang SEO performance, at pataasin ang iyong mga benta!
Nahihirapan bang pumili ng traffic package? Makipag-ugnayan sa amin, at tutulungan ka ng aming staff.
Libreng Konsultasyon